Standard Features

• High Performance Compact Display Autopilot System for Outboard Vessels
  
• Revolutionary "Adaptive" technology continuously improves performance for exact and safe navigation
  
• Standard "Rate Gyro" PG500R compass sensor (Compass Options include Furuno SC Series Satellite Compass, Gyro, etc.)
  
• Four Operating Modes:
  
  
  
  • AUTO(Fixed Heading Control)
    
  • ADVANCED AUTO(Fixed Ground Tracking Eliminating Effects of Wind, Tides, Swells, or Fishing Operations)
    
  • NAV(Navigation Track Control)
    
  • AUTOWORK(Used For Trolling or Fishing Vessels That May Require Permanent Trim Compensation)
  
  
• Large 3.6" (viewable area, 160 x 80 pixels) Silver Bright, Hi-resolution graphics LCD display
  
• Proportional Rate Rudder Control(w/Reversing Motor Drive Units) or Solenoid Control
  
• Unique Fishhunter Modes - Execute ORBIT, SPIRAL, & FIG-8 modes directly or remotely from a Furuno TLL capable product
  
• Precision NAV mode XTE Control (.001 NM)
  
• Extensive "Quick-Change" user customizable navigation data display modes
  
• Various Audible and Visual Alarms including user programmable alarm parameters
  
• "One-Touch" STBY, AUTO, NAV, and DODGE selections
  
• Tactile rotary knob course/menu selection
  
• Multiple Station Capability - Mix & Match up to six Navpilot 500 (FAP5001A), 511 (FAP5011A) or 520 (FAP5021A) displays  in any combination
  
• May be configured for various hydraulic or Mechanical Steering Systems

Basic System Specifications and Contents:

• FAP5001 Waterproof control unit with 10 meter pigtail interface/power cable, white weather cover, and standard flush-mount hardware(Control Unit Mounting Brackets Optional)
  
• FAP5002 Universal Processor Unit/Junction Box:
  
  
  
  • Controls Reversible Drive Units or Solenoid activated steering systems drawing up to 50 amps (25 amps continuous)
    
  • Two software selectable/nameable NMEA0183 NAV Data input ports and two fully programmable NMEA0183 output ports; additionally, one shared RS232 NMEA0183 I/O port is included
    
  • Extra Large Wire Compression Terminals for Power/Motor Connections and "Pluggable" wire compression connections for Navpilot sensors and I/O ports
  
  
• FAPAR4102 Waterproof Linear Rudder Reference Unit with Outboard Mounting Brackets
  
  
  
  • FAPAR4102 is designed specifically for the Teleflex HC5345 8" Hydraulic Steering Cylinder
    
  • FAPAR4102 features a magnetic sensing design that has no moving parts and is immune to EMI from Fuel Injected Outboards.
    
  • FAPAR4102 installs in a protected location behind the HC5345 Cylinder making it much less susceptible to damage from outboard engine raise/lower and fishing operations
    
  
  
  
  
• PG500R "Rate Gyro" compass sensor with LED Status Indicators and 10 Meter pigtail interface/power cable
  
  
  
  • PG500R includes one dedicated 6-pin Furuno AD10 protocal 25mS Data Port and one dedicated 6-pin NMEA0183 (0183HS Selectable) Data Port for Heading data distribution to radar, sonar, AIS, etc...(Both Output Ports feature robust RS485 Drivers that may be paralleled to three devices each)
    
  • PG500R includes 10 Meter 6 pin-to-6 pin AD10/NMEA0183 Heading Cable for interfacing Furuno 17/18/19xx series Radar displays
    
  • Full Control of PG500R is performed through Navpilot Display
  
  
  
  

Notes:

• Furuno Hydraulic Drive Units and Voltage/Sizing information are located on the Accessories page
  
• Navpilot Systems may be retrofitted to any existing 12V/24V DC Reversing or Solenoid Drive Unit provided that the current limitations are observed
  
• Various handheld and fixed mount remote control units are found on the Accessories page
  

Power Requirements

• 12 or 24 VDC
  
• 7 Watts - 1 control head (excluding pump)
  
• 36 Watts - 6 control heads (excluding pump)