Navpod is the leader in alternative mounting possibilities to protect your marine gps/chartplotter, radar, fishfinder.  Cascade GPS now offers all current Navpod units from Ocean Equipment.  These part numbers are not yet displayed on this website for shopping cart checkout.  Please email or call us to request pricing and shipping quotes.  Visit Navpod here http://www.navpod.com/Exclusive-Distributor/NavPod/default.aspx to view what Navpod now has to offer.  These include PowerPod Grand Prix, with 4-way Swivel Base, Stanchion Kits, 2-way swivel base, Overhead PowerPod, Wide Angle Guards, Traditional Radar or Instrument Series, for Sailboat or Power.  Navpod makes housings for Raymarine, Furuno, Interphase, Lowrance, Garmin, Simrad, Northstar, JRC among other.

Features on all NavPods:

• 
  

  Watertight Silicone Seal - Keeps rain and spray off electrical connections on the back of electronics.

  
  


• 
  

  Tamperproof - Special fasteners and wrench are included that provide security and convenience to leave electronics onboard.

  
  


• 
  

  Concealed Wiring - No loose wires are exposed to corrosion and UV damage.

  
  


• Clean Installation - The Clean look of flush mounting. Mount your display where you can best see and reach it.

Grand Prix Series NavPods feature:

• New Industrial Design with Style Enhancements - Built to complement the latest marine electronic products
  
  


• Double Seal for Improved Watertight Integrity - Outer silicone seal is complemented by an internal seal made of memory resistant urethane foam gasketing that keeps its shape and sealing ability with frequent opening and closing
  
  


• Polished Stainless Steel TamperPruf Fasteners
  - Increased size and strength
  - New buttonhead style screws have deeper wrench recesses for better tightening power
  - UV stable polyurethane washers under each fastener improves sealing and holding power of fasteners
  - Longer 6” Tamperpruf wrench for easier assembly

Grand Prix Series PowerPods have all the above features Plus:

• New Style Two-Way Swivel Base
  - Allows left-to-right swivel action
  - Choice of 20 or 40 degree tilt angle
  - Double material thickness for added strength
  
  


• Super Strong Swivel Tube
  - Internal swivel mechanism made of Marlon for strength and reliability
  - Approved for overhead mounting of PowerPods
  - Large 1.875" inside diameter allows for plenty of wiring/cabling to pass through
  
  


• Extra Large Swivel Washer
  5” Teflon and EPDM rubber swivel washers between the pod base and back provide smooth swivel action and wide distribution of load to eliminate vibration

NavPod's are available in 2 different models:

• 
  

  2-way Swivel - allows left to right swivel for the best viewing angle of your instrument display. Pre-cut models are available for select instruments. Pre-cut models com with a Flush Mount Kit, which includes the gasket and mounting hardware.

  
  


• 4-way Swivel - allows front to back and left to right swivel for the best viewing angle of your instrument display. Pre-cut models are available for select instruments. Pre-cut models com with a Flush Mount Kit, which includes the gasket and mounting hardware.

Navpod

Result pages:   1 2 3 4 5 6 7 8 9   NAVPOD AG10 ANGLE GUARD 9.5" WIDE DOUBLE BEND 1" DIA. SKU: AG10 AngleGuard, 2 Bend, 1" Diameter Tube, 58"H for one Instrument (NP131, NP142) and / or Radar / Chartplotter NavPod (CP10, RP41, RP182, RP150) See details NAVPOD AG115 ANGLE GUARD 9.5" WIDE SINGLE BEND 1.25" DIA. SKU: ag115 AngleGuard, 1 Bend, 58"H for one Instrument and/or Radar / Chartplotter NavPod up to 10.5" See details NAVPOD AG116 ANGLE GUARD 9.5" WIDE SINGLE BEND 1.25" DIA SKU: ag116 AngleGuard, 1 Bend, 58"H for one Instrument and/or Radar / Chartplotter NavPod up to 13.5" See details NAVPOD AG125 ANGLE GUARD 9.5" WIDE DOUBLE BEND 1.25" DIA. SKU: ag125 AngleGuard, 2 Bend, 58"H for one Instrument and/or Radar / Chartplotter NavPod up to 10.5" See details NAVPOD AG126 ANGLE GUARD 9.5" WIDE DOUBLE BEND 1.25" DIA SKU: ag126 AngleGuard, 2 Bend, 58"H for one Instrument and/or Radar / Chartplotter NavPod up to 13.5" See details NAVPOD AG215 ANGLE GUARD 12" WIDE SINGLE BEND 1.25" DIA. SKU: ag215 AG215 See details NAVPOD AG225 ANGLE GUARD 12" WIDE DOUBLE BEND 1.25" DIA. SKU: ag225 AngleGuard, 2 Bend, 58"H for one Instrument and/or Radar Chartplotter NavPod up to 10.5" See details NAVPOD AG226 ANGLE GUARD 12" WIDE DOUBLE BEND 1.25" DIA. SKU: ag226 AngleGuard, 2 Bend, 58"H for one Instrument and/or Radar Chartplotter NavPod up to 13.5" See details NAVPOD CP10 RADAR/CHARTPLOTTER UNCUT USABLE FACE 14W X 9.5 H SKU: cp10 Uncut (usable face = 14"w x 9.5"h) See details NAVPOD CP10FR PRECUT FURUNO 7" NAVNET (CENTERED) SKU: cp10fr Pre-cut for Furuno 7" Navnet in Cetner See details NAVPOD CP10GA PRECUT GARMIN 2010C/3010C/3210C SKU: cp10ga Pre-cut for Garmin 2010 See details NAVPOD CP10RA PRECUT RAYMARINE 7" RL/SL COLOR & MONO + 2 ST60 SKU: cp10ra Pre-cut for Raymarien 7" Monochrome or Color Displays & 2 ST60's See details NAVPOD CP10RC PRECUT RAYMARINE 8" C80 SKU: cp10rc Pre-cut for Raymarien 8" C80 See details NAVPOD CP20 RADAR/CHARTPLOTTER UNCUT USABLE FACE 14W X 9.5 H SKU: cp20 uncut See details

Result pages:

1

2

3

4

5

6

7

8

9