All of Southwest Windpower’s guyed tower kits include everything you need except:
1) Pipe material
2) Anchors
3) Power wires

To keep your costs low and to consider site variables, these components should be purchased locally. When selecting the materials for the construction of your tower, please consider the following:

• Pipe Material: For most conditions, we recommend a “schedule 40” pipe material. This offers a wall thickness of 0.125 inches, which is strong enough to resist most wind conditions. If you are using fence pipe material, make sure you ask for “SS40”. If you live in an environment were your winds will never exceed 80 mph (140 km) then we suggest using a thinner wall material such as a “schedule 20”. In conduit material, this is called “SS20”.
• Anchors: The anchors are by far the most difficult part of installing a tower. Once you have them in the ground, a tower installation gets really easy. There are various soil materials that you should consider prior to installing your tower. The type of anchor should also vary. Our owner manuals have recommendations based on soil type.
• Power wires: Because of the size of turbine and variable length from the turbine to your batteries/inverter, it is impossible to know the proper wire size. Once you have understood the distance from the turbine to the battery, refer to the wind turbine’s owners manual for the proper wire size. Be sure to select the right type of wire for your environment.